Cond 3310 IDS
Transmitting data (USB interface)
ba77051e04
07/2017
43
8
Transmitting data (USB interface)
8.1
Outputting current measurement data
8.2
Transmitting data (to a PC)
The meter has a USB-B interface (
USB Device
) e.g. to connect a PC.
Via the USB-B interface (
USB Device
) you can store data to a PC or printer and
update the meter software.
8.3
Connecting the PC / USB-B interface
(
USB Device
)
Connect the Cond 3310 IDS to the PC via the USB-B interface.
Installation of the
USB driver on the
PC
System requirements of the PC for installation of the USB driver:
PC with at least one free USB connection and CD-ROM drive
Windows 2000, Windows XP, Windows Vista or Windows 7.
1.
Output the current measurement data to the USB-B interface with
<F2>
[
USB output
].
1.
Insert the supplied installation CD in the CD drive of your PC.
2.
Install the driver from the CD.
Follow the Windows installation instructions as necessary.
3.
Connect the Cond 3310 IDS to the PC via the USB-B interface.
The meter is listed as a virtual COM interface among the connections in
the Windows instrument manager.
4.
Set the same transmission data at the connected instrument (PC):
Baud rate: to be selected in the range 1200 ... 19200
Handshake: RTS/CTS
Set at the PC only:
– Parity: none
– Data bits: 8
– Stop bits: 2
Summary of Contents for Cond 3310 IDS
Page 6: ...Contents Cond 3310 IDS 6 ba77051e04 07 2017...
Page 56: ...Index Cond 3310 IDS 56 ba77051e04 07 2017...
Page 57: ......
