17-2
Command Reference Guide
17.2. Command Summary
Function
Command Syntax
Command Access Level
Admin.
SuperUser
User
ViewOnly
Display
Port and Plug Status
/S
[Enter]
X
X
X
X
Port Diagnostics
/SD
[Enter]
X
X
X
X
Port Parameters (Who)
/W [n]
[Enter]
X
X
X
X
Plug Group Status
/SG
[Enter]
X
X
X
X
Network Status
/SN
[Enter]
X
X
X
X
Help Menu
/H
[Enter]
X
X
X
X
Log Functions
/L
[Enter]
X
X
Site ID / Unit Information
/J
[*]
[Enter]
X
X
X
X
Control
Exit Command Mode
/X
[Enter]
X
X
X
X
Connect - Local <Remote>
/C <n> [n]
[Enter]
X
X
X
Disconnect Ports
/D <n|Nn|*>
[Enter]
X
X
Read Buffer
/R <n>
[Enter]
X
X
X
Erase Buffer(s)
/E <n|*>
[Enter]
X
X
X
Boot Plug
n
/BOOT <n>[,Y]
[Enter]
X
X
X
Turn Plug
n
On
/ON <n>[,Y]
[Enter]
X
X
X
Turn Plug
n
Off
/OFF <n>[,Y]
[Enter]
X
X
X
Default All Plugs
/DPL[,Y]
[Enter]
X
X
X
Send Parameter File
/U
[Enter]
X
Send SSH Keys
/K <n>
[Enter]
X
Unlock Invalid Access
/UL
[Enter]
X
Outbound Telnet
/TELNET <ip> [port] [raw]
[Enter]
X
X
X
Outbound SSH
/SSH <ip> -l <username>
[Enter]
X
X
X
Broadcast Mode
/broadcast <port list>
[Enter]
X
X
Configuration
System Parameters
/F
[Enter]
X
Serial Port Parameters
/P
[Enter]
X
Plug Parameters
/PL <n>
[Enter]
X
Plug Group Parameters
/G
[Enter]
X
Network Configuration
/N
[Enter]
X
Reboot Options
/RB
[Enter]
X
Alarm Configuration
/AC
[Enter]
X
Reboot System
/I
[Enter]
X
X
Upgrade Firmware
/UF
[Enter]
X
Copy Port Parameters
/CP <z>
[Enter]
X
Test Network Configuration
/TEST
[Enter]
X
In Administrator and SuperUser modes, all ports and plugs are displayed. In User and ViewOnly modes, the status screen will
only include the ports and plugs allowed by the account.
User level accounts and ViewOnly level accounts are only allowed to view parameters for their resident port (the port that was
used to access command mode.)
In Administrator mode, all Plug Groups are displayed. In SuperUser, User and ViewOnly modes, the Plug Group Status Screen
will only include the Plug Groups allowed by the account.
In Administrator Mode, Help Menus will list all commands. In SuperUser, User and ViewOnly modes, Help Menus will only list the
commands allowed by the access level.
If the optional asterisk argument is included in the /J command line, then in addition to the Site ID message, the RSM-8R can also
display the Model Number, Serial Number, Firmware Version and other information.
User level accounts are only allowed to create a connection to the Serial Ports that are specifically permitted by the account.
User level accounts are not allowed to create Third Party (remote) port connections.
The "
,Y
" argument can be included to suppress the command confirmation prompt.
In order to invoke this command, Outbound Telnet/SSH and Outbound Service Access must be enabled for your account.
In SuperUser mode, configuration menus can be displayed, but parameters cannot be changed.
In SuperUser mode, the /I command only offers one option: Reboot Only (Do Not Default Parameters.)