WTI CAS-81 User Manual Download | Manualshive

Page: 14 / 14

background image

D. Customer Service

Customer Service hours are 8:00 AM to 5:00 PM, Pacific Time, Monday through Friday. When
calling, please be prepared to give the name and make of the unit, its serial number, and a
description of its symptoms. If the unit should need to be returned for factory repair it must be
accompanied by a Return Authorization number from Customer Service.

WTI Customer Service

5 Sterling

Irvine, California 92618

949-586-9950

Toll Free: 1-800-854-7226

Fax: 949-457-8138

e-mail: [email protected]

Trademark and Copyright Information

WTI and Western Telematic are trademarks of Western Telematic Incorporated. All other
product names mentioned in this publication are trademarks or registered trademarks of their
respective companies.

Information and descriptions contained herein are the property of Western Telematic, Inc..
Such information and descriptions may not be copied, disseminated or distributed without the
express written consent of Western Telematic, Inc..

© Copyright Western Telematic Inc., 1997, 2000
All rights reserved.

June 2000
September 1997
Part Number: 12365 Revision: C

Apx-4

CAS-81 Code Activated Switch

Appendices

«
...
12
13
14

Summary of Contents for CAS-81















Reviews:

No comments

Related manuals for CAS-81

D-PFS4226-24ET-240

Brand: Dahua Pages: 58

Brand: Magnetrol Pages: 24

Brand: Xenteq Pages: 22

Brand: SIMON RWA Pages: 3

Brand: Cole Hersee Pages: 2

Brand: Exsys Pages: 14

Brand: AsGa Pages: 23

Brand: LevelOne Pages: 35

Brand: W Box Technologies Pages: 10

Brand: N-Tron Pages: 15

Brand: MLis Pages: 85

Brand: Alloy Pages: 13

SMART Home AWMR-230

Brand: Trust Pages: 57

Brand: H-Tronic Pages: 36

Brand: IBM Pages: 60

menber's Series

Brand: Littelfuse Pages: 2

Brand: Comelit Pages: 8

Brand: Rosewill Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands