WTC DEP 300s, User Manual

Page: 82 / 137

M035030-V2.0-Q06905/07-2017
79 of 104
LEVEL 2.4 RELOAD OPTIONS MENU
The Reload Options Menu allows the user to configure many different
weld control options. The control options available will vary
depending upon the customers application requirements and the
firmware loaded into the weld control.
Below is an example of a typical Reload Options Menu:
2. 4. 1 CHANGING THE CONTROL OPTIONS
The following explains how to change the control options, using
Reload Defaults as an example. In this example, the weld timer will be
changed from ROBOT MODE to MACHINE MODE:
B
Using the or keys as necessary move the cursor over
the RELOAD DEFAULTS window and press the key.
C
A drop down menu will appear displaying all available options.
Using the or keys as necessary move the cursor over
MACHINE option and press the key.
Non- user WTC
Diagnostic tools
Set a preference -
HIDE or SHOW , for
the non-configurable
setup parameters.
2. 4. 1
Customize web
page settings
2. 4. 3
2. 4. 2