wsm Kubota L4100, Workshop Manual

Page: 59 / 346

GENERAL L4100, WSM
G-44
(EU)
Hydraulic Arm Shaft Bushing Press-Fitting Tool
Application
• Use for replacing the hydraulic arm shaft bushings in the
hydraulic cylinder body.
9Y1210278GEG0053US0
Right Left
A
54.7 to 54.9 mm
(2.154 to 5.161 in.) 49.7 to 49.9 mm
(1.957 to 1.964 in.)
B
24.5 to 25.5 mm
(0.965 to 1.00 in.) 21.5 to 22.5 mm
(0.847 to 0.885 in.)
C 40.0 mm (1.57 in.) 40.0 mm (1.57 in.)
D 32.0 mm (1.26 in.) 32.0 mm (1.26 in.)
E
49.70 to 49.90 mm
(1.957 to 1.964 in.) 44.70 to 44.90 mm
(1.760 to 1.767 in.)
F 70.0 mm dia. (2.76 in. dia.)
G 40.0 mm dia. (1.57 in. dia.)
H 50.0 mm (1.97 in.)
I 10.0 mm (0.39 in.)
a 6.3 µm (250 µin.)
b 6.3 µm (250 µin.)
c 6.3 µm (250 µin.)
d 6.3 µm (250 µin.)
KiSC issued 08, 2012 A