manualshive.com logo in svg

WS824 WS848-5D, Manual

Share
Download
WS824 WS848-5D Manual Download Page 69

3 

 

69 

9. Digital private phone 

 

 

On one end of the line is the RJ11 interface, the other end is RJ45: 

 

When pressing the modular plug, turn the metal face of RJ11 modular plug 

upward and number 1, 2, 3 and 4 from left to right. The plug on the side of the 

private phone is yellow, green, red and black in turn.   

 

Turn the metal face of RJ45 modular plug upward and number 1, 2, 

3,4,5,6,7 and 8 from left to right. A RJ45 modular plug can suppress two private 

phone lines. Select 1-4, yellow, green, red, black in turn. 5-8 used to suppress 

the second private phone line, both ends in the same order. 

 

Both ends of the line are RJ11 modular plug: 

 

When pressing the modular plug, turn the metal face of RJ11 modular plug 

upward and number 1, 2, 3 and 4 from left to right. The plug on the side of the 

private phone is yellow, green, red and black in turn. The plug on the side of 

PBX is black, red, green and yellow in turn. 

 

WEB:WWW.WS824.ORG TEL:020-85261379 18144823824

Summary of Contents for WS848-5D









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands