WS824 WS848-5D Manual Download

Page: 35 / 72

Example:

Close the sixth exterior port.

Operation:

The programming host extension off-hook, then dial *#99 6666# into

programming mode, continue to dial 211 06 0#, on-hook after hearing the prompt

tone.

6.4 Exterior call answering mode

The system provides the following response methods for customers to

choose:



Night on duty mode: specifically divided into night computer and manual on

duty.



IVR single key navigation: fixed for computer on duty.



Single dedicated line: fixed for manual duty.



Day on duty mode: specifically divided into day computer and manual on duty.

The default response mode of system is day computer on duty.

Computer on duty :

Caller will hear the prompt voice, according to the prompt for secondary dialing,

the system according to the dial number, call the appropriate extension. Can save a lot

of labor, improve work efficiency.

Manual on duty:

When a exterior call is detected, the system will automatically call the extension

within the group according to the preset telephone unit and its ringing mode. After

answering by the telephone, carry on the manual transfer operation.

Instruction: 211 AB K#

Description:

K = 0 means close, 1 means open.

AB is 01-32, means exterior line 1-32. When AB is omitted, the

instruction indicates the batch setting of all exterior ports.

WEB:WWW.WS824.ORG TEL:020-85261379 18144823824

Summary of Contents for WS848-5D









































































Search results

Summary of Contents for WS848-5D

Reviews:

Related manuals for WS848-5D

Brands by name

Popular brands

WS824 WS848-5D, Manual

Search results

Summary of Contents for WS848-5D

Reviews:

Related manuals for WS848-5D

Brands by name

Popular brands