SDP6-IP, IP-Enabled 6” Solution Dome
www.wrenassociates.com (800)
881-2249
7L257-revA 9/1/2006
Page 1 of 3
Overview
The IP-Enabled Pendant Solution Dome line delivers attractive, durable products
for indoor security. Solution Domes are an excellent value------well-built, well-
priced and designed for easy installation and maintenance.
Suggested Installation Equipment
•
#2 Phillips-head screwdriver
•
Pliers (optional, for DC power)
Component List [Figure 1]
A.
Upper Housing Assembly
B.
Encoder Module
C.
Fixed Camera Bracket
D.
Three-Piece Camera Mounting Bracket
E.
6’’ Dome Assembly
F.
Power Lead Extension and Connectors (not shown)
G.
Wing Screw (not shown)
Warnings and Safeguards
Prior to installation and use of this product, please observe the
following warnings
1.
Installation and servicing should be done by qualified personnel,
and all work done should conform to local codes.
2.
Using replacement parts or accessories other than Wren may
invalidate the warranty.
3.
This unit is designed to operate on either IEEE 802.3af POE or 12VDC
power. Do not bring any other voltages into the housing.
4.
Make sure that the installation method is capable of supporting three
(3)
times the weight of the SDP6-IP housing and enclosed contents.
5.
Verify proper installation of cabling to support camera power and
communication requirements for fixed camera applications.
Preparation
1.
Carefully unpack box and verify that all components listed are included
[Figure 1].
2.
Remove the Dome and Trim Ring Assy from the upper housing by turning
the assembly counter-clockwise, taking care that dome does not become
scratched or damaged.
3.
Remove the fixed camera bracket and the three
(3) piece mounting
bracket by removing the 3 wing nuts securing it to the SDP6 housing.
4.
Run CAT5 (and, optionally, 12VDC leads) to the location where the
assembly is to be installed.
NOTE
POE power must be IEEE 802.3af compliant. Optional 12VDC power must be from
a regulated power source and of the correct polarity (center positive). (See Master
Power Supply Instructions for wiring/installation instructions.)
Indoor IP Solutions:
SDP6-
IP
6” Solution Dome
FIGURE 1