EG8-PTZ-IP, IP-Enabled 8”
Environmental Globe PTZ
Instruction Sheet
PROPERTY OF WREN
Page 1 of 3
7L247 REV-B 10-09-2006
124 WREN PARKWAY • JEFFERSON CITY, MO 65109 • TOLL FREE (800) 881-2249 • FAX (877) 893-2317
www.wrensolutions.com
Overview
The IP-Enabled Environmental Globe (EG8) is an attractive, durable solution
for outdoor applications accommodating a pan-tilt-zoom camera. It is an ideal
solution for situations where reliability and aesthetics are important such as
retail, property management, commercial and industrial facilities
Suggested Installation Equipment
1.
#2 Phillips-head screwdriver
2.
Outdoor-approved pipe thread sealant (included)
Component List [Figure 1]
A.
Housing (double wall)
B.
IP Encoder Module
C.
Camera Mounting Plate Assy (with optional heater/blower and
circuit board)
D.
PTZ camera
E.
Dome Assy
F.
Foam Dust Plug (not shown)
G.
Dome Safety Tether (not shown)
H.
Mounting Plate Safety Tether (not shown)
I. Pipe Thread Sealant (not shown)
Warnings and Safeguards
Prior to installation and use of this product, please observe the following
warnings
1.
Installation and servicing should be done by qualified personnel, and all work
done should conform to local codes.
2.
Using replacement parts or accessories other than Wren may invalidate the
warranty.
3.
Use only Wren-approved replacement parts or supplied accessories. Failure to
comply may invalidate remaining warranty period.
4.
Verify proper location and installation of the housing mount
(1½” NPT pipe
or approved mount). The pipe or mount shall be capable of supporting three
(3) times the weight of the housing and its contents.
5.
Verify proper installation of cabling to support camera power and
communication requirements for fixed camera applications.
Outdoor IP Solutions
EG8-
PTZ-IP
8” Environmental Globe
