EG8-IP, IP-Enabled 8”
Environmental Globe
Instruction Sheet
PROPERTY OF WREN
Page 1 of 3
7L240rev-C 12/19/2006
124 WREN PARKWAY • JEFFERSON CITY, MO 65109 • TOLL FREE (800) 881-2249 • FAX (877) 893-2317
www.wrensolutions.com
Figure
1
Overview
The IP-Enabled Environmental Globe (EG8) is an attractive, durable
solution for outdoor applications accommodating a single fixed camera. It
is an ideal solution for situations where reliability and aesthetics are
important such as retail, property management, commercial and industrial
facilities
Suggested Installation Equipment
a.
#2 Phillips-head screwdriver
b.
7/16” Wrench or socket
c.
Outdoor-approved pipe thread sealant (included)
Component List
A.
Foam Dust Plug
B.
Housing (double wall)
C.
Mounting Plate safety Tether
D.
Dome Safety Tether
E.
Camera Mounting Plate Assembly (with optional
heater/blower and circuit board)
F.
Flat Washer
G.
Wing Nut
H.
Multi-position Camera Bracket
I.
Camera Bolt
J.
8” Dome Assembly
Warnings and Safeguards
Prior to installation and use of this product, please observe the following
warnings
1.
Installation and servicing should be performed by qualified personnel
only.
2.
All work should conform to local building codes.
3.
Use only Wren-approved replacement parts or supplied accessories.
Failure to comply may invalidate remaining warranty period.
4.
Verify proper location and installation of the housing mount
(1½” NPT
pipe or approved mount).
The pipe or mount shall be capable of
supporting three
(3)
times the weight of the housing and its contents.
5.
Verify proper installation of cabling to support camera power and
communication requirements for fixed camera applications.
6.
The EG8 is designed to be operated by a 24VAC power source
capable of supplying 2 amps continuously, plus required amperage for
the selected camera(s).
(See Master Power Supply instructions for
wiring/installation instructions of Master Power Supply.)
OUTDOOR IP SOLUTIONS:
EG8-IP
8” Environmental Globe
