background image

PV830 Pneumatic PicoPump

World Precision Instruments 

23

* Electrodes, batteries and other consumable parts are warranted for 30 days only from the date on which the 
customer receives these items.

WARRANTY

WPI (World Precision Instruments, Inc.) warrants to the original purchaser that this equipment, 
including its components and parts, shall be free from defects in material and workmanship for a 
period of one year* from the date of receipt. WPI’s obligation under this warranty shall be limited 
to repair or replacement, at WPI’s option, of the equipment or defective components or parts upon 
receipt thereof f.o.b. WPI, Sarasota, Florida U.S.A. Return of a repaired instrument shall be f.o.b. 
Sarasota.

The above warranty is contingent upon normal usage and does not cover products which have been 
modified without WPI’s approval or which have been subjected to unusual physical or electrical stress 
or on which the original identification marks have been removed or altered. The above warranty will 
not apply if adjustment, repair or parts replacement is required because of accident, neglect, misuse, 
failure of electric power, air conditioning, humidity control, or causes other than normal and ordinary 
usage.

To the extent that any of its equipment is furnished by a manufacturer other than WPI, the foregoing 
warranty shall be applicable only to the extent of the warranty furnished by such other manufacturer. 
This warranty will not apply to appearance terms, such as knobs, handles, dials or the like.

WPI makes no warranty of any kind, express or implied or statutory, including without limitation any 
warranties of merchantability and/or fitness for a particular purpose. WPI shall not be liable for any 
damages, whether direct, indirect, special or consequential arising from a failure of this product to 
operate in the manner desired by the user. WPI shall not be liable for any damage to data or property 
that may be caused directly or indirectly by use of this product.

Claims and Returns

Inspect all shipments upon receipt. Missing cartons or obvious damage to cartons should be noted 
on the delivery receipt before signing. Concealed loss or damage should be reported at once to the 
carrier and an inspection requested. All claims for shortage or damage must be made within ten 
(10) days after receipt of shipment. Claims for lost shipments must be made within thirty (30) days 
of receipt of invoice or other notification of shipment. Please save damaged or pilfered cartons until 
claim is settled. In some instances, photographic documentation may be required. Some items are 
time-sensitive; WPI assumes no extended warranty or any liability for use beyond the date specified 
on the container

Do not return any goods to us without obtaining prior approval and instructions from our Returns 
Department. Goods returned (unauthorized) by collect freight may be refused. Goods accepted for 
restocking will be exchanged or credited to your WPI account. Goods returned which were ordered 
by customers in error are subject to a 25% restocking charge. Equipment which was built as a special 
order cannot be returned.

Repairs

Contact our Customer Service Department for assistance in the repair of apparatus. Do not return 
goods until instructions have been received. Returned items must be securely packed to prevent 
further damage in transit. The Customer is responsible for paying shipping expenses, including 
adequate insurance on all items returned for repairs. Identification of the item(s) by model number, 
name, as well as complete description of the difficulties experienced should be written on the repair 
purchase order and on a tag attached to the item.

Summary of Contents for PicoPump PV830





























Reviews: