Wow Snooper+, Translation Of The Original Instructions

Page: 34 / 309

33
7.2 Configuring BT for Windows Bluetooth environment
Note!
This procedure is only necessary if problems are encountered when connecting to the device in the
WOW! software.
Please only perform steps 1-2 with the iQ 150
Generation 24
diagnosis system. There should be no Snooper or
device present in the Bluetooth environment with this device.
1. Open Bluetooth environment.
Click in the task bar on the "Bluetooth symbol"
1
and
"Display Bluetooth network devices"
2
.
2. Delete all unused WOW! Snooper devices or VCI devic-
es with a right click and "Remove device"
1
.
3. Connect the device to a power supply, e.g.
the diagnosis connector in the vehicle.
4. Click on "Add device"
2
.
The system searches for BT devices within range.
5. Select the with the correct serial number
1
.
The serial number can be found on the Snooper's data
plate.
6. Confirm the added device in the following window.
7. Configure the BT in the WOW! software. See
"4.2 Setting up connections to " on page .
1
2
1
2
1