manualshive.com logo in svg

Wouxun KG-935G, Manual

Share
Download
Wouxun KG-935G Manual Download Page 53

53

Menu Functions

Menu Functions

[14: BACKLIGHT] Backlight Timeout

Function: Sets the timeout of the LCD display backlight while the radio is in standby. 

The timer can be set from 1-20 seconds in one second increments. It can also 

be set to turn off immediately or always remain on.

Options: ALWAYS OFF/ALWAYS ON/1-20S

Default: 8 Seconds

[15: SCAN-MODE] Scan Mode

Function: Scan mode settings

Options: TO/CO/SE

Default: SE

TO: When a signal is detected, scanning stops. Scan will pause to wait for further 

activity and will then resume if no operation is carried out within 5 seconds. 

Pressing PTT will transmit on the currently selected channel.

CO: When a signal is detected, scanning stops and resumes immediately after the sig-

nal is lost. Pressing PTT will transmit on the currently selected channel.

SE: When a signal is detected, scanning stops. Pressing PTT will transmit on the chan-

Summary of Contents for KG-935G























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands