manualshive.com logo in svg

Wouxun KG-935G, Manual

Share
Download
Wouxun KG-935G Manual Download Page 48

48

Menu Functions

Menu Functions

[01: SQL] Squelch

Function: The squelch function mutes the speaker when no signal is detected. Adjusting 

the squelch sensitivity allows you to control how strong of a signal is required 

in order to unmute the speaker. Selecting a lower number will allow weaker 

signals to be heard, higher numbers require a stronger signal. Selecting [0] 

will unmute the speaker at all times. Squelch is set independently for each 

area.

Options: 0-9

Default: 5

[02: TX-POWER] Output Power

Function: Sets the transmit power of the radio. The radio has three power optons: Low 

(0.5W), Medium (4.5W) and High (5.5W). Wattage is approximate. Note, 

the transmit power for GMRS channels 8-14 are restricted by the FCC to 

0.5 watts and can be used on low power only. The transmit power of channels 

1-7 are limited to 5 watts and can be used on Low or Medium power only. 

The KG-935G will automatically adjust the power to the FCC limits.

Summary of Contents for KG-935G























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands