48
Basic Operation
Scanning CTCSS / DCS Codes
The KG-1000G Plus is equipped with the ability to scan an incoming signal for a
CTCSS or DCS tone and update the current channel’s tone settings once the tone is
identified.
To activate CTCSS / DCS scan, press the [MENU] key and navigate to the TONE-
SCAN menu item. Press [MENU] again to enter the menu item and you will see
“SEEK QT” on the screen.
The scan will begin when a signal is received. The scan will stop when the signal ends
and resume from where it left off the next time the signal is received, until it identifies
the correct tone. Use the [UP]/[DOWN] arrow keys to scan in a different direction.
Use the [PF2] side key to toggle between scanning the standard CTCSS, positive DCS,
and negative DCS tone list. See the TONESCAN menu item (page 65) for more
information.
