background image

2

GENERAL SAFETY 

WARNINGS

WARNING!

  

Read all safety 

warnings and all instructions.

 

Failure to follow the warnings and instructions 
may result in electric shock, fire and/or serious 
injury.

Save all warnings and instructions for 

future reference.

-   This appliance is not intended for use by 

persons (including children) with reduced 
physical, sensory or mental capabilities, 
or lack of experience and knowledge, 
unless they have been given supervision or 
instruction concerning use of the appliance 
by a person responsible for their safety. 

-   Children should be supervised to ensure 

that they do not play with the appliance.

If the supply cord is damaged, it must be 
replaced by the manufacturer, its service 
agent or similarly qualified persons in order to 
avoid a hazard.

ADDITIONAL SAFETY 

INSTRUCTIONS FOR YOUR 

HEAT GUN

1.   Before connecting the unit to the mains - 

ensure the unit is switched OFF because it 
will achieve maximum heat in a little time.

2.  Always wear protective gloves and 

eyewear because it can reach 580

0

 

Centigrade.

3.  Always place the appliance on its stand 

after use and allow it to cool down before 
storage and never touch the heat deflector.

4.  Never attempt to use the appliance to dry 

animals, clothing or hair.

5.  Never use this appliance as a hair dryer.
6.  Be aware that heat may be conducted to 

combustible materials that are out of sight.

7.   Be careful when using this appliance 

in places where there are combustible 
materials or gases, extreme caution must 
be taken to prevent fire or explosion.

8.  Do not apply to the same place for a long 

time.

9.  Do not use in presence of an explosive 

atmosphere. Always use it in ventilated 
areas.

10. Place the product on its stand after use and 

allow cooling before storage.

11.  Do not leave the heat gun unattended 

when it is switched on.

12. The appliance is not to be stored or left 

outdoors.

13. This appliance is not intended for use by 

persons (including children) with reduced 
physical, sensory or mental capabilities, 
or lack of experience and knowledge, 
unless they have been given supervision or 
instruction concerning use of the appliance 
by a person responsible for their safety.

14. Children should be supervised to ensure 

that they do not play with the appliance. 

15. If the supply cord is damaged, it must be 

replaced by a special assembly available 
from a service agent.

16. This product is designed for light domestic 

use only, it is not designed for industrial 
purposes and every care has been taken 
to make the heat gun safe, accidents can 
happen. By following the simple safety 
guide, you can avoid serious accidents.

Summary of Contents for WX041













Reviews: