11
10
High pressure cleaner WG600E WG601E WG602E
4. pAtIo cleANeR (WG602e oNly) (See fig. m, N)
Always use the patio cleaner together with the lance
when cleaning patios or garden floors. Align the angle
connector on the top of the patio cleaner and the
rotating nozzle on the bottom.
Screw the rotating nozzle clockwise to tighten onto the
thread of the angle connector.
To attach the patio cleaner to the extension lance align
the ridges on the angle connector with the two grooves
on the extension lance.
Press together and rotate the patio cleaner clockwise to
secure it (See Fig. M).
Removing
Press the patio cleaner towards the extension lance and
rotate it anti-clockwise to remove it
If the angle of the patio cleaner assembly to the trigger
gun and extension lance is incorrect, detach the patio
cleaner from the extension lance, rotate the patio
cleaner 180 degrees, align ridges and grooves, and
connect again.
Patio Cleaner water pressure may be adjusted.
Turning the regulator knob clockwise increases the
pressure, anti-clockwise decreases the pressure (See
Fig. N).
OPERATION
connection to the water supply
WARNING:
Do not connect machine to potable
water supply.
1. Attach a suitable water hose with the correct
connection to the water supply and then attach the
other end to the water filter on the cleaner.
2 Once, the hose connection is secure, turn on the
water supply.
Alternative water supply
A self priming mechanism allows for the product
to optionally be connected to a bucket or water
tank instead of a water supply main. With the hose
inserted into the bucket or water tank, the self priming
mechanism will draw water directly from the bucket or
tank.
Note:
Pay close attention to the amount of water
in the bucket or water tank to ensure that there is an
adequate supply of water to avoid running the pump
dry.
J
I
K
L
M
N
G
H1
H2
E1
E2
F
B
C
D
A
