11
10
High pressure cleaner WG600E WG601E WG602E
2. RotoR (tURbo) Nozzle (WG601e WG602e
oNly)
Insert the rotor nozzle into the lance. (See Fig. I)
Check that the nozzle is firmly attached by pulling on it.
It should not pull out.
Removing
Press the lock button on the lance and pull out the rotor
(turbo) nozzle. Release the lock button. (See Fig. H2)
3. hIGh pReSSURe foAm Nozzle
Put the hose in the detergent bottle, and tighten the
nozzle clockwise. (See Fig. J)
The high pressure foam nozzle must be connected to
the fixed spray nozzle to operate.
Align the ridges on the foam nozzle with the two
grooves on the fixed spray nozzle.
Press together and turn the foam nozzle clockwise to
secure it.
For best operation the detergent bottle of the foam
nozzle should be located on the underside of the fixed
spray nozzle.
Rotate the lance in the trigger gun anti-clockwise until it
is in the correct position. (See Fig. K)
Removing
Rotate the foam nozzle anti-clockwise on the fixed
spray nozzle to detach.
Storage of foam nozzle
When foam nozzle is not in use it may be stored on the
product. Located on the left side of the machine is a
notch that the foam nozzle will slide into. (See Fig. L)
J
I
K
L
M
N
G
H1
H2
E1
E2
F
B
C
D
A
