5
Battery Charger
WA3867
COMPONENT LIST
1.
BATTERY PACK *
2.
CHARGER
3.
CHARGER INDICATOR LIGHT
* Not all the accessories illustrated or
described are included in standard delivery.
TECHNICAL DATA
Rated input voltage
100-240V~50/60Hz
Output voltage
16-20V
Charging current
6.0A
Rated Input power
160W
Charge battery
Li-Ion
Number of cells
4/5/10
Charging time (approx.)
1.3Ah
15min
1.5Ah
17min
2.0Ah
25min
3.0Ah
38min
4.0Ah
45min
6.0Ah
70min
Protection class
/II
Machine weight
0.7kg
For the technical data of the types, the number of
cells and the rated capacity of the batteries that
can be charged, please refer the nameplate of the
battery pack supplied by Worx.
We recommend that you purchase your accessories
listed in the above list from the same store that
sold you the battery charger. Refer to the accessory
packaging for further details. Store personnel can
assist you and offer advice.
CHARGING PROCEDURE
NOTE:
Before using the tool, read the
instruction book carefully.
CHARGING INSTRUCTIONS
1. CHARGING YOUR BATTERY PACK
WARNING:
The charger and battery pack are
specifically designed to work together so do
not attempt to use any other devices. Never insert
or allow metallic objects into your charger or battery
pack connections because an electrical failure and
hazard will occur.
2. BEFORE USING YOUR CORDLESS TOOL
Your battery pack is UNCHARGED and you must
charge once before use.
3. HOW TO CHARGE YOUR BATTERY
CHARGING PROCEDURE
1) Plug the charger into an appropriate outlet.
2) Slide the battery pack into the charger. The
LIGHT (3) will become green and flash to show
charging has started.
3) After charging15min(1.3Ah) / 17min(1.5Ah) /
25min(2.0Ah) / 38min(3.0Ah) / 45min( 4.0Ah) /
70min(6.0Ah), the light will stay green without
flashing, which means the battery is full, and
charging is completed.
WARNING: When battery charge runs
out after continuous use or exposure
to direct sunlight or heat, allow time for the
battery to cool down before re-charging to
achieve the full charge.
CHARGING INDICATOR
This charger is designed to detect some problems
that can arise with battery packs. Indicator lights
indicate problems (see table below). If this occurs,
insert a new battery pack to determine if the charger
is OK. If the new battery charges correctly, then the
original pack is defective and should be returned
to a service center or recycling service center. If the
new battery pack displays the same problem as the
original Battery Pack, have the charger tested at an
authorized service center.
Light
ON/ Flash
Status
Red on
Defective Battery
Red flash
- - - - -
Battery Temperature
Protection
The temperature of
battery pack is less
than 0
o
C or more than
45
o
C.
Green on
Fully Charged