Operation—Operating the Machine
ER79617,0000DC4 -19-02OCT12-1/1
Cold Weather Start Aid—If Equipped
CAUTION: Prevent possible injury from exploding
container. Starting fluid is highly flammable.
Keep container away from heat, sparks, and open
flame. Contents are pressurized. Do not puncture
or incinerate container. Remove container from
machine if engine does not need starting fluid.
IMPORTANT: Prevent possible damage to the
engine. The diesel fired coolant heater is
required for temperatures -20°C (-4°F) and
below. See your authorized dealer.
IMPORTANT: Prevent possible damage to engine.
Temperatures below -20°C (-4°F) require an
additional warmup period. See Cold Weather
Warmup in this section.
The cold weather start aid is equipped on the machine
as an option. Cold weather start aid is automatically
activated by the engine control unit (ECU). Starting fluid is
required when ambient temperature is below 0°C (32°F).
To replace start aid can:
1. Open the left rear service door to access the start
aid can.
2. Remove clamp (1) from container.
3. Turn container (2) counterclockwise to remove the
start aid can.
4. Install new container by turning clockwise into starting
valve.
Operating Machine Without Start Aid Container
Installed
TS281
—UN—15APR13
Pressurized Fluids
TX1002722A
—UN—18SEP12
Ether Clamp and Container
1— Clamp
2— Container
If no starting fluid is needed, remove container and install
dust cap.
2-3-4
092221
PN=105
Summary of Contents for 380GLC
