Worldline davinci III Vending, Integration Manual

Page: 9 / 14

9
2.7 EARTH
It must be ensured that the correct earth is in place between
the davinci III Vending module and the slot reader.
2.6 PIN ASSIGNMENT FOR THE CONNECTORS
2.6.1 PIN assignment for the davinci III Vending module
Article name Connector type Application 1 2 3 4 5 6 7 8
Power Molex 12 V-36 VDC GND VCC
Power RJ45 12 V-20 VAC AC1 AC1 AC1 AC2 AC2 AC2
Connect to module Mini-DIN 6-pin Connection to
the components
+12V +12V RxD TxD GND GND
Article name Connector type Application 1 2 3 4 5 6 7 8
Connect to module Mini-DIN 6-pin Connection to
the components
+12V +12V RxD TxD GND GND
2.6.2 PIN assignment for the card readers
(Connectors dependent on the respective card reader):
2.6.3 PIN assignment for the RFID reader
Article name Connector type Application 1 2 3 4 5 6 7 8
Power Screw/plug connection 5 VDC Supply (Aux) VCC GND
Comm RJ45 Ethernet Tx+ Tx- Rx+ Rx-
ECR RJI2 Cash register
interface
U in
Ext
+12V
U in
Ext
+12V
RxD TxD GND GND
USB type 1.1 Standard type A
Standard type B
Host and device + 5V D- D+ GND
Connect to module Mini-DIN 6-pin Connection to
the components
+12V +12V RxD TxD GND GND
Figure: Earthing example davinci III Vending