13
5.3 TEST – INSTALLATION WITHOUT ACTIVATION
During a menu query regarding activation, the process can
be cancelled by pressing the STOP button and then entering
the Z password. In doing so, the status of the dismantling
protection will not be queried or amended. In this mode, the
terminal can be put into operation and, e.g. initialised.
Important:
In this mode, no transactions are possible.
By executing a repeat PowerUp, the user is then taken to
the same “Activation menu” again.
5.2 REPLACING THE VENDING MODULE
When replacing the Vending module it is important to note
that the card reader must also be replaced. Otherwise, it is
no longer technically possible to execute “Plaintext” PIN
verifications against chip cards, which have an SDA chip
(static data authentication). These would then, under certain
circumstances, no longer function correctly. The Swiss
Maestro card is not affected by this.
5.4 HELP WITH MOUNTING AND ASSEMBLY
• If the silicone seal is not mounted correctly, the device
must be returned (see example: davinci 2 Vending).
• The silicone seal is mounted correctly, the device is
watertight and can be mounted (example: davinci III
Vending).
• The flex cable is very sensitive and must
not
be bent
or contacted.
• There should be no gap between the card reader and
the mouthpiece.
!
