ECRESO FM 100/300 W, user manual– 06/2015
Page 98
Head Office : Parc d’activites Kennedy - 20, avenue Neil Armstrong – 33700 Bordeaux-Merignac (France)
Tel +33 (0)5 57 928 928 – Fax +33 (0)5 57 928 929 –
www.worldcastsystems.com – [email protected]
When connected, the unit information is automatically updated.
With a serial connection, if the module is password protected, you will need to enter
the password before you can access all the functions.
8.2.2.
Configuration
Once connected, click the “Start” button to retrieve RF values and
thresholds on the main page.
These values are described section 5.3.
Values that can be set are followed by the button
. Click this button
after having updated a value to send it to the transmitter.
A set of buttons give access to other parameters. Click on one of them to
open a window displaying associated parameters.
As long as the application is in “Start” mode, current values are retrieved
for all open windows.
Clicking “Stop” prevents retrieval of data; however, sending data to the
module remains possible.
