ECRESO FM 100/300 W, user manual– 06/2015
Page 16
Head Office : Parc d’activites Kennedy - 20, avenue Neil Armstrong – 33700 Bordeaux-Merignac (France)
Tel +33 (0)5 57 928 928 – Fax +33 (0)5 57 928 929 –
www.worldcastsystems.com – [email protected]
2.3.4.
Synoptic diagram
On transmitters, as standard:
Line 1 is an analog audio input (
Left
and
Right
)
Line 2 is a digital input (
AES
, 1 connector)
For an analog mono signal, use the left channel (
Mono
); for a digital mono signal
use the AES input.
Line 1 is not necessarily the main audio channel. Depending on the desired
configuration, use Line 2 or MPX inputs as the main audio source (see section
5.3).
!
Do not inject a digital signal on L and R channels, or an analog signal on
the AES channel!
2.3.5.
2U Rack
The choice of stainless steel as material guarantees against corrosion. The rack structure and the structure of the
monoblock front panel reinforce the device. The rectangular outline of the front panel has an LCD display. The
transport handles are mechanically interchangeable and can be removed. The cover is fixed by a set of M3 POZIDRIV
screws and can be easily removed. The user has access to every module to set the parameters of the device.
