ECRESO FM 100/300 W, user manual– 06/2015
Page 137
Head Office : Parc d’activites Kennedy - 20, avenue Neil Armstrong – 33700 Bordeaux-Merignac (France)
Tel +33 (0)5 57 928 928 – Fax +33 (0)5 57 928 929 –
www.worldcastsystems.com – [email protected]
9.6.4.
Date / Time
Path:
System
/Date/Date / Time
A couple of Ecreso FM internal components are fitted with a clock. This page allows you to make sure they are
synchronized. The IP board clock can be set on this page: it can manage time zones and will be used as reference for
the system clock which cannot manage time zone and which is used for RDS.
System date:
it can be updated manually by clicking the “Send” button or automatically by checking
the synchronization box. The IP board time and date is then applied to the system time and date.
Set system time zone:
The user selects the geographical zone from the list. Important to have this set correctly when using an
NTP server.
Set system date:
the user may update both date (year/month/day) and time (hour/minute/second)
of the IP board clock.
Network Time Protocol:
NTP update
The user can enter a time server address to update the IP board clock automatically. Make sure this
address can be reached by the unit; specifically, the gateway must be properly set. Specify whether it
