AUDEMAT FM Probe 1.2.x User Manual
–
07/2021
Page 31
WorldCast Systems SAS - 20, avenue Neil Armstrong
–
33700 Merignac
–
Bordeaux Métropole (France)
+33 (0)5 57 928 928
–
–
www.worldcastsystems.com
6.4.5.
Channel setttings
On this page, configure monitoring for the selected program.
1-
Update the information entered when the channel was created as needed.
Select the monitoring mode:
•
Active monitoring: the unit monitors, logs measurements and generates alarms on out of tolerance
conditions
•
Measure without alarm: the unit monitors and logs measurements
•
Standby: the channel is configured but not monitored.
For alarms to be generated,
the option “Send alarm” needs also to be enabled at the parameter level.
Modify the monitoring cycle duration if needed: when a single receiver monitors multiple channels, this is the
time it will lock on this channel for monitoring before moving on to the next.
2-
RF level monitoring:
•
Check parameters you want to monitor and the alarms you want to send
•
display additional options
, explained chapter 4:
o
Time out before alarm
o
Hysteresis
o
Intermittent error max number allowed in the time window
o
Intermittent error threshold
1
2
4
3
3
5
6
