Worldcast Systems AUDEMAT FM PROBE, User Manual

Page: 19 / 80

AUDEMAT FM Probe 1.2.x User Manual
– 07/2021
Page 19
WorldCast Systems SAS - 20, avenue Neil Armstrong – 33700 Merignac – Bordeaux Métropole (France)
+33 (0)5 57 928 928 – contact@worldcastsystems.com – www.worldcastsystems.com
5. FRONT PANEL APPLICATION
5.1. Presentation
The front panel application makes it possible to set network parameters and to view monitoring status, including real
time readings.
5.2. Working principle
The key pad on the right of the screen allows you to browse through the menus:
If the screen is in standby mode, press any key to reactivate it.
Arrows are used for scrolling
through menus, selecting
parameters and adjusting
values.
LEDs indicate possible
directions, for instance, only
up and down arrows are
available when scrolling
through main menus.
When adjusting values, press
on the top or down button for
small increments or swipe
your fingers around for large
increments
The Check button is used to:
•
Access a lower level menu
•
Enable the edit mode for
parameters that can be
modified,
•
Confirm a new value.
The Return button is used to
•
Return to the higher level
screen,
•
When in edit mode, go
back to the initial value.
When parameters can be
edited, they are
highlighted when
selected. Press the Check
button to switch to edit
mode
The white scroll bar
indicates there are
additional values. Press
the down button to view
them.