Worldcast Systems AUDEMAT FM PROBE, User Manual

Page: 12 / 80

AUDEMAT FM Probe 1.2.x User Manual
– 07/2021
Page 12
WorldCast Systems SAS - 20, avenue Neil Armstrong – 33700 Merignac – Bordeaux Métropole (France)
+33 (0)5 57 928 928 – contact@worldcastsystems.com – www.worldcastsystems.com
3. GETTING STARTED WITH THE AUDEMAT FM PROBE
3.1. Connecting to the network

See section 5.2 for the front panel application working principle.
Before connecting to the network, check the AUDEMAT FM PROBE ’s IP address:
When the unit has not been set yet, the main screen
is blank, press the Return button to display the
menu.
Use the down arrow until you see the System menu
and select it. Press the Check button.
Use the down arrow to select the Network menu
and press the Check button
Use the down arrow to select the Configuration
menu and press the Check button.
If you need to change the IP address:
•
Use the Check button to switch to edit
mode
•
Use the Left and Right buttons to select the
various groups of digits
•
Use the Up and Down buttons or the swipe
around the wheel modify the values
•
When the IP address has been modified,
use the Check button to save the new
value.
Proceed the same way to change the mask and gateway if necessary.
You may now connect the AUDEMAT FM PROBE to the network on the ETH0 port using the provided Ethernet cable.