WORLD OF MEDICINE A127, Instructions For Use Manual

Page: 33 / 62

Function Test
33 / 62
7 Function Test
WARNING!
Functional test
The functional test must be performed by the user prior to each surgery.
WARNING!
Checking the warning signals
The warning signals must be checking prior to each device use. The system is to be
set up so that all warning signals can be perceived.
WARNING!
Original accessories
For your own safety and that of your patient, use only original accessories.
WARNING!
Obvious defects
Never use the device if it has suspected or confirmed defects, especially if these in-
volve the power plugs or the mains power supply connection cables. In this case
have the device repaired by authorized service personnel.
WARNING!
Preventing infections
Sterilize reusable instruments and reusable tubes sets (NOT FOR SALE IN USA) be-
fore surgery to prevent infections. Check all the single-use/disposable items before
removing them from the package to ensure that the packaging is intact and that
the expiration date is still valid.
NOTE!
Fastening the pump
Make sure the toggle screw is tightened sufficiently to fasten the pump securely in
place. Also check that the toggle screw remains tightened.
7.1 Preparing the Function Test
Check to make sure the fluid bags meet the listed specifications (see Chapter Con-
necting the Irrigation Fluid Bags [
}
28]) and are suspended properly.
7.2 Performing the Function Test
The fluid bags and the instrument are connected to the pump (see Chapter Starting
the Device [
} 29]). The pump is turned on.
NOTE!
Performing the tests
These tests must be performed out of the joints.
1. Select a nominal pressure = 100 mmHg
2. Open the inflow valve at instrument and close the outflow valve.
en