Page 4
Step 1
Assembly Steps
Using a second person to assist you, place Table Top (A) upside down onto a padded, non-marring surface.
Step
2
Step 1
(
H-
1)
Short Allen Bolt
A
D
D
(
H-
1)
over the metal frame on the underside of Table Top (A). Secure both Upper Wood Support Bars (D) using
x 2
Next, position both Upper Wood Support Bars (D) as shown, making sure the notches at the ends of both bars attach
90%
Allen key
(
H-
7)
(
H-
2)
Medium Allen Bolt
Allen key
(
H-
7)
(
H-
3)
Barrel Nut
(
H-
1)
Short Allen Bolt
B
B
C
x 2
(
H-
2)
(
H-
7)
(
H-
3)
(
H-
1)
90%
IMPORTANT:
It is highly recommended to have a second person to assist during this product assembly.
Do not fully tighten allen bolts until all components are in place. Do not over tighten allen bolts.
TOP
Short Allen Bolts (H-1) and Flat Washers (H-8). Engage the bolts using Allen Key (H-7)
HINT:
Thread a spare Short Allen Bolt (H-1) into the
end of Barrel Nut (H-3) to keep the barrel thread aligned.
Remove the spare Short Allen Bolt (H-1) when you're done.
(used temporarily)
TOP
Arrange both Legs (B) with the tops facing downwards as shown. Attach Lower Wood Crossbar (C) to Legs (B) and
secure both sides by attaching a Medium Allen Bolt (H-2) and Flat Washers (H-6) into a Barrel Nut (H-3).
Use a spare Short Allen Bolt (H-1) threaded into Barrel Nut (H-3) to hold the threads aligned while engaging Medium
Allen Bolt (H-2). Engage Medium Allen Bolts (H-2) using Allen Key (H-7)
but do not fully tighten them yet.
Once Barrel Nuts (H-3) have been engaged,
remove the spare Short Allen Bold (H-1).
(
H-
8)
(
H-
8)
Flat Washer M6
but do not fully tighten them yet.
(
H-
6)
Flat Washer
(
H-
6)
