13. FIRMWARE UPDATE
13
Firmware update
The SAFETIS update is available at the web page https://www.workswell‐thermal‐camera.com/firmware‐update/safetis/.
The update can be applied using web server application or SAFETIS Control unit interface.
13.1 Firmware update using web server
Once you have obtained the update file, connect to the SAFETIS web server. The update file should have extension
”.wsm”.
Log in as administrator and on tab ”System” on panel ”Basic Settings” select the update file.
Figure 13.1: Update file selection.
The file will be uploaded to SAFETIS and checked for errors, which can take several minutes.
When ready, window with the result information shows up. To install the update, system will be rebooted and
the connection to the SAFETIS web server will be lost for several minutes.
After finishing the operation, log in as administrator again and confirm the new firmware version number.
E‐mail and Web
[email protected]
www.workswell.eu
Mobile:
+420 725 877 063
ID:
Reg. No.: 29048575
VAT No.: CZ29048575
Headquarters
U Albrechtova vrchu 12
155 00, Prague 13
Czech Republic
Version 210224 EN, 24
th
Feb, 2021
All pictures are only for illustration.
Real values may vary.
43