1 of 4
Workrite Ergonomics | 800.959.9675 www.workriteergo.com
A
Conform Articulating Arms
Qty: 2
C
M4 × 10 VESA mount screw
Qty: 8
B
Dual Arm Adaptor
Qty: 1
E
Pivot Cover Cap
Qty: 2
D
M4 × 6 VESA mount screw
Qty: 8
Parts Included
Required Parts Sold Separately
Tools Required
Assembly & Installation Instructions:
Conform Dual Articulating Arm CONF-2SDA-WOB-S
Attach Dual Arm Adaptor to Selected Base Option
Remove the Bolt and Washers from base
(if not already removed.)
Remove the Pivot Limiter.
Place Dual Arm Adaptor (B) on the pin mount
from your selected base option.
Tighten the two pre-installed set screws (hidden
in view) with the 2.5 mm Allen wrench on the
Dual Arm Adaptor to secure the Adaptor to the
base.
#2 Phillips head screwdriver
2.5 mm Allen wrench (included with base)
5 mm Allen wrench (included with base)
Selected base option with mounting hardware.
Do not use on hollow core tables.
Do not rotate or suspend arm beyond table surface.
Do not exceed 17 lb. per Arm.
M8 Flat Head Cap Screw
M4 8mm Screw
M4 12mm Screw
M4 16mm Screw
Spacer
Plastic Cap
7/32” Allen Wrench
1/8” Allen Wrench
Button Head Allen Cap Screw
Pivot Pin
Steel Washer
Plastic Pivot Washer
1
a
a
b
c
d
d
c
b
C-Clamp
Mount shown
Pivot
Limiter
Pre-installed
Set Screws
