Workrite Ergonomics | 800.959.9675 www.workriteergo.com
1 of 3
0.4126"
#3 Drive
0.134"
3/4"
0.216"
#12 Screw Size
Tools Required:
Required, Sold Separately:
Desk or Table
Included:
⅛" Drill Bit
Clamp (2x)
4 mm Hex Key
#3 Phillips Screwdriver
or Drill/Driver
ID Part Name
Qty
A
Hanging Pedestal
1
B
#12 × ¾" Phillips Pan Head Screws 6
Cordless Drill
Assembly & Installation Instructions:
Hanging Pedestal
ACC-HPED-X
WARNING:
Installation on table with payload below 200 lb not recommended
Weight capacity of Hanging Pedestal is 30 lb
NOTE: Different worksurface materials may require alternative mounting screws
Completely remove drawer
from main body of pedestal.
Flip the plastic tab on
each side of drawer to
release drawer from
main body (right tab
down, left tab up).
REMOVE DRAWER
1
Main Body
Mounting Bracket
Plastic Tab
Drawer
A
B
