FL5380C
EXECUTIVE HIGH BACK FAUX LEATHER CHAIR
OPERATING INSTRUCTIONS
LIMITED WARRANTY
Worksmart
®
chairs are warranted from the date of purchase against failure due to material and workmanship as follows:
• 15 Years on all non-moving metal parts.
• 5 Years on component parts including Control mechanisms, pneumatic cylinders, wood, plastic parts, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
• We cannot warrant leather against routine scratching and scuffing, as all leather is subject to minor blemishes in use.
To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and
obtain return authorization. At it’s option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer’s component. The customer must prepay freight on any components returned to the factory. Return
freight on components still in warranty will be paid by Office Star Products.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 250 lbs. or
less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other
event beyond the control of Office Star Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or
consequential damages is excluded. The user assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a two
year warranty on all parts applies. Fabric and foam is warranted for one year. This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts
are damaged or missing. Our Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail
by Fax 1-909-930-5629, or toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00
p.m. Pacific Time.
WARNING
1. Use this product only one person at a time.
2. Do not use this product unless all bolts, screws,
and knobs are securely tightened.
3. Check that all bolts, screws, and knobs are tight every
three months or as needed.
4. Do not overturn back tilt knob when decreasing tension.
5. Dispose of packing material properly. Do not use plastic
cover as head covering. It may cause suffocation.
6. Do not use this product as a stepladder.
7. Use this product for its intended purpose only.
8. Use mild detergent only for cleaning.
FEATURES
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat, remove pressure from seat and pull lever (1) up.
To lower seat height, sit on chair and pull lever (1) up.
NOTE:
It is normal for chair to slightly lower under body weight.
• LOCKING TILT ADJUSTMENT
For individual comfort, this chair has been equipped with an
adjustment that will allow the user to change the tension of
the tilting feature. Turn knob (2) clockwise to increase tension
and counter-clockwise to decrease or ease the tension. To lock,
return chair to the upright position and push lever (1) in. To
unlock, pull lever (1) out.
NOTE:
Be careful not to loosen back tilt adjustment knob completely.
1
2
Enlevez toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la liste et vérifier les quantités des pièces.
ÉTAPE 1
Insérez cinq Roulettes (2) dans la Base (1), et les poussez très fort jusqu’à ce que vous entendiez ou sentiez la Roulette (2) s’enclencher. Insérez
le Vérin pneumatique (3) dans dans Base (1).
ÉTAPE 2
Attachez les Bras (5L et 5R) au Corps du chaise (4) à l’aide des deux Boulons (6) pour chaque Bras (5).
SERREZ COMPLETEMENT LES
BOULONS (6).
Couvrez les trous dans les Bras (5L et 5R) à l’aide des deux Bouchons en plastique (7) pour chaque Bras (5).
ÉTAPE 3
Placez le siège assemblé sur le Vérin pneumatique (3) et appliquez une pression vers le bas.
ATTENTION : AVANT D’UTILISER LA CHAISE, S’ASSURER D’AVOIR RESSERRÉ COMPLÈTEMENT TOUTES LES BOULONS.
© Office Star Products avril 2014
FL5380C
FAUTEUIL DE DIRECTION À DOSSIER HAUT EN SIMILI-CUIR
INSTRUCTIONS DE MONTAGE
PIÈCE
QTÉ
1.
Base . . . . . . . . . . . . . . . . . . . . . .1
2.
Roulettes . . . . . . . . . . . . . . . . . . .5
3.
Vérin pneumatique . . . . . . . . . . .1
4.
Corps du chaise . . . . . . . . . . . . . .1
5.
Bras (5L et 5R) . . . . . . . . . . . . . .2
6.
Boulons . . . . . . . . . . . . . . . . . . . .4
7.
Bouchons en plastique . . . . . . . .4
8.
Clé Allen (non montré) . . . . . . . . .1
3
4
3
2
1
7
6
5R
5L
ÉTAPE 1
ÉTAPE 2
ÉTAPE 3
