ECH38615A / ECH38665A / ECH38675A
EXECUTIVE ECO LEATHER CHAIR
OPERATING INSTRUCTIONS
WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and
knobs are securely tightened.
3. Check that all bolts screws and knobs are tight every
three months or as needed.
4. Do not overturn back tilt knob when decreasing
tension.
5. Dispose of packing material properly. Do not use
plastic cover as head covering. It may cause
suffocation.
6. Do not use chair as a stepladder.
7. Use this chair for its intended purpose only.
8. Use mild detergent only for cleaning.
FEATURES
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and lift lever (1).
To lower seat height sit on chair and lift lever (1).
NOTE:
It is normal for chair to slightly lower under
body weight.
• LOCKING TILT ADJUSTMENT
For individual comfort, this chair has been equipped with
an adjustment that will allow the user to change the tension
of the tilting feature. Turn knob (2) clockwise to increase
tension and counter-clockwise to decrease or ease the
tension. To lock return chair to the upright position and push
lever (1) in. To unlock pull lever (1) out.
NOTE:
Be careful not to loosen the back tilt adjustment knob
completely.
• FLIP ARMS
Simply lift arms or push down to desired height.
1
2
LIMITED WARRANTy
Work Smart chairs are warranted from the date of purchase against failure due to material and workmanship as follows:
• 15 Years on all non-moving metal parts.
• 5 Years on component parts including Control mechanisms, pneumatic cylinders, wood, plastic parts, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
• We cannot warrant leather against routine scratching and scuffing, as all leather is subject to minor blemishes in use.
To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and
obtain return authorization. At it’s option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer’s component. The customer must prepay freight on any components returned to the factory. Return
freight on components still in warranty will be paid by Office Star Products.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 350 lbs. or
less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other
event beyond the control of Office Star Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or
consequential damages is excluded. The user assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a two
year warranty on all parts applies. Fabric and foam is warranted for one year.
This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts
are damaged or missing. Our Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail
by Fax 1-909-930-5629, or toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00
p.m. Pacific Time.
ECH38615A / ECH38665A / ECH38675A
FAUTEUIL DE DIRECTION EN CUIR ECO
INSTRUCTIONS DE MONTAGE
ÉTAPE 1
ÉTAPE 4
ÉTAPE 2
ÉTAPE 3
ÉTAPE 5
© Office Star Products Décembre 2012
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la liste et vérifier
que les quantités des pièces reçues sont correctes.
ÉTAPE 1
Insérer cinq Roulettes (2) dans la Base (1), les pousser très fort jusqu’à ce que vous entendiez ou sentiez la Roulette (2)
s’enclencher. Insérer le Cylindre pneumatique (3) dans la Base (1) et glisser les Soufflets (4) sur le Cylindre pneumatique (3).
ÉTAPE 2
Fixez la Plaque du siège (5) au Coussin du siège (6) avec la flèche vers l’avant de la chaise.
Fixez l’arrière de la Plaque du siège (5) avec deux Vis courtes (9) et deux Vis longues (10) pour l’avant de la Plaque du siège (5)
. SERREZ
TOUTES LES VIS COMME IL FAUT AVEC LA CLÉ ALLEN (12).
ÉTAPE 3
Placer le siège assemblé sur le dessus du Vérin pneumatique (3) et pousser vers le bas.
ÉTAPE 4
Fixer les Bras (8R et 8L) au Coussin du siège (6) avec deux Vis longues (10) pour chaque Bras (8).
NE PAS SERRER
LES VIS.
ÉTAPE 5
Fixer les Bras (8R et 8L) au Coussin du dossier (7) avec deux Vis longues (10) pour chaque Bras (8).
RESSERRER
COMPLÈTEMENT TOUTES LES VIS AVEC LA CLÉ ALLEN (12).
Couvrir les trous dans les Bras (8R et 8L) en utilisant deux
Bouchons en plastique (11) pour chaque Bras (8).
ATTENTION: AVANT D’UTILISER LE FAUTEUIL, S’ASSURER D’AVOIR SERRÉ COMPLÈTEMENT
TOUTES LES VIS.
PIÈCE
QTÉ
1.
Base . . . . . . . . . . . . . . . . . . . . . . . 1
2.
Roulettes . . . . . . . . . . . . . . . . . . . . 5
3.
Vérin pneumatique . . . . . . . . . . . . 1
4.
Soufflet . . . . . . . . . . . . . . . . . . . . . 1
5.
Plaque du siège . . . . . . . . . . . . . . . 1
6.
Coussin du siège . . . . . . . . . . . . . . 1
7.
Coussin du dossier . . . . . . . . . . . . 1
8.
Bras (8L et 8R) . . . . . . . . . . . . . . . 2
9.
Vis courtes . . . . . . . . . . . . . . . . . . . 2
10.
Vis longues . . . . . . . . . . . . . . . . 10
11.
Bouchons en Plastique . . . . . . . . 8
12.
Clé Allen (non montré) . . . . . . . . . 1
1
9
10
2
3
4
5
7
6
8L
8R
3
6
10
11
11 10
