DIGILINE MX MKII
USER MANUAL
VERSION 1.1
DIGILINE MX MKII
www.workpro.es
3
1.
INTRODUCTION
Digiline MX MKII is an 8x8 audio matrix with DSP, adaptable to most of your needs. The device
has balanced inputs and outputs to provide it with greater immunity against electromagnetic
interference.
Digiline MX MKII is a versatile device supporting control through its GPIs, dedicated wall
controls like the WNC1, custom layouts with WorkCAD3 Editor or third-party systems. Also, it
supports control by both UDP and RS232 commands.
2.
FEATURES
Analogical audio inputs
Number of inputs
8 balanced Mic or Line inputs
Audio connector
4 x Euroblock, 12 pin 3.81mm
Input sensitivity (Line)
-6 dBu
Mic fixed gain
43.5 dB
Analogical audio outputs
Número de salidas
8 balanced outputs
Conector de audio
2 x Euroblock, 12 pin 3.81mm
Audio processing
8 filters.
2 High pass crossover filters, Low Pass.
Weighted matrix of sum of inputs inputs
Compressor / Limiter / Noise Gate
General
SNR
> 100 dB
THD + N
< 0.01 %
DSP Architecture
32 bit processing with 40 bits of precision.
Sample frequency
48000 Hz
Filter types (input/output)
Low pass, High pass, Low Shelving, High
Shelving, Band pass, Peak, Notch y All pass.
Crossover filter types
Butterworth, Linkwith-Riley, Bessel
Memories
8 memories
Thir-party control
UDP , RS232
