5
Overview of control elements and symbols
Sense ll – 6 720 812 775 (2014/10)
2.4
Applicability of the technical documentation
Information for the heat sources, heating and controllers must
also be referenced in conjunction with this document.
2.5
Declaration of Conformity
The design and operation of this product comply
with European Directives and the supplementary
national requirements. Its conformity is
demonstrated by the CE marking .
You can ask for a copy of the declaration of conformity for this
product. For this see the contact address on the back cover of
these instructions.
2.6
Operation after power failure
In the event of a power failure, or periods with disconnected
boiler, no settings are lost. The control unit re-starts when the
power returns. It may be necessary to reset the time and date.
No other settings are necessary.
3
Overview of control elements and symbols
Fig. 1
Control elements
[1]
advance key
[2]
manual key
[3]
auto key
[4]
menu key
[5]
Info key
[6]
Back key
[7]
Selector
6 720 812 773-03.1O
5
6
7
4
2
3
1
The first press of any Key or adjustment of the
Selector will only switch on the backlight of the
display. The keys/selector must therefore be
pressed/adjusted twice to make a change.