35
Calling up information about the system
Sense ll – 6 720 812 775 (2014/10)
Fig. 5
Menu structure of the info menu
1)
Only available if an MB LAN2 communication module or
an appliance electronics with integrated communication
interface (MX 25) is present.
2)
Only available without cascade module (e.g. MC 400) for
certain types of heat source.
Menu:
Heating
The menu items in this menu are only available for installed
heating circuits.
Info
Internet
1)
Heating
IP connection
Heating circuit 1 ... 8
Server connection
Set room temp.
SW version
Actual room temp.
Login data
Actual flow temp.
MAC address
Operating Mode
System information
2)
DHW
Burner starts
DHW system I ... II
Burner runtime
Set temp.
Water pressure
Actual temp.
Operating code
Therm. disinf. DHW cyl.
Energy consumption
2)
Solar
24h: gas heating
Solar sensors
24h: elec. heating
Solar yield
24h: gas DHW
Outdoor temp.
24h: elec. DHW
Outdoor temp. curve
30d: gas heating
Outdoor temp.
30d: elec. heating
30d: gas DHW
30d: elec. DHW
6 720 815 238-07.1O
Menu item
description
Set room temp.
The desired room temperature that is
currently valid in the selected heating
circuit:
•
In automatic mode, the desired
room temperature can change
several times a day, if necessary.
•
In manual operation, it is
permanently constant
Actual room temp.
Currently measured room temperature
in the selected heating circuit
Actual flow temp.
Currently measured flow temperature
in the selected heating circuit
Operating Mode
Currently valid operating mode in the
selected heating circuit (
Off
,
Heating
,
Setback
,
Summer
,
Holiday
or
Manual
)
Table 31 Information about the heating