10
Getting started
Sense ll – 6 720 812 775 (2014/10)
4.3
Changing the room temperature
If the control type constant is set for a heating
circuit (e.g. swimming pool or ventilation unit),
the temperature for this heating circuit can
only be set by the Installer. In this case, auto
and man keys do not have any function.
Operating the appliance
Result
To check the current
required room temperature
Automatic mode
▶ Press the auto key.
The room temperature required currently (active operating mode) and the next
switching time are shown in a pop-up window in the lower part of the display.
Manual operation
▶ Press the man key.
The required room temperature is shown in a pop-up window in the lower part of
the display.
If manual operation with restricted duration is active, the required room
temperature and the duration of manual operation are displayed.
If it is too cold or too warm for you today:
Change the room temperature temporarily
Automatic mode
Bringing forward the room temperature of the next heating on time (switching
time)
▶ Press the adv key to bring forward the room temperature of the next switching
time for the time program that is displayed.
An adv symbol appears on the display. The change applies until the next
switching time in your heating system time program is reached. After this, the
time program settings are restored.
Undoing the change to the next switching time
▶ Press the adv key to undo the change to the next switching time.
The change is undone. The time program settings are now restored.
Table 7 Getting started – Room temperature
6 720 815 237-04.1O
6 720 815 237-05.1O