2
SAFETY
General Safety Warnings for Power Tools in Household Use
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
●
This appliance may be used by children aged 8 years and
above and by persons with limited physical, sensory or mental
capabilities or lack of experience and knowledge,provided that
they are under supervision or have been told how to use the
appliance safely and are aware of the potential risks. Children
must not play with the appliance. Cleaning and user
maintenance tasks may not be carried out by children unless
they are supervised.
●
To avoid potential risks, damaged mains cables should be
replaced by the manufacturer, their customer service
department or a similarly qualified person.
Additional safety instructions for glue guns
●
Children should be supervised to ensure that they do not play
with the appliance.
●
CAUTION! This appliance must be placed on its stand when
not in use.
●
Always protect the appliance from rain and moisture. Water
entering a power tool will increase the risk of electric shock.
●
Do not misuse the power cord, e.g. to carry or hang up
the appliance, or to pull the plug from the socket. Keep
cord away from heat, oil, sharp edges or moving parts. If
the power cord is damaged or severed during work, do
not touch the cord but rather pull out the power plug.
Damaged or entangled cords increase the risk of electric
shock.
●
Only for indoor use.
●
If you take a break of longer than 30 minutes, pull out
the power plug.
●
Allow the appliance to cool completely after use and
before storage.
●
Do not work on any material containing asbestos.
●
Avoid the risk of injury or fire as well as health risks:
RISK OF BURNS! The adhesive and the nozzle reach a
temperature of around 200°C. Do not touch the nozzle or
the glue. Do not allow hot glue to come into contact with
people or animals. In case of contact with skin, rinse the
affected part in cold running water for a few minutes. Do
not attempt to remove the adhesive
from the skin.
●
Always route the power cable towards the rear, away
from the appliance.
OPERATION
Before use
Preparing the surfaces to be glued:
♦
Do not use flammable solvents to clean the surfaces to be
glued.
♦
The ambient temperature and the materials to be bonded may
not be colder than 5°C and not warmer than 50°C.
♦
The area to be glued must be clean, dry and free of grease.
♦
Smooth surfaces should be roughened before gluing.
♦
Quick-cooling materials such as steel should be warmed a
little to facilitate adhesion.
Inserting a glue stick:
1. Push the glue stick (4) into the glue sticker holder (5).
2. Allow the appliance heat up for about 90 seconds. The
appliance is now ready for use.
Battery level display
The battery level display (3) indicates the charge level using 2
coloured LEDs.
Green LED: The battery is fully charged. the cordless hot glue
gun is ready for use
Red LED: Battery unsaturated
Switching on:
1. To turn on the cordless hot glue gun, keep pressing the ON
/ OFF switch (2) for around 5 seconds until the temperature
indicator (1) lights up red. The glue is heated up.
The temperature indicator (1) lights up green as soon as the appliance
has reached working temperature.
Switching off:
1. To turn off the cordless hot glue gun, press the ON / OFF
switch (2) until the temperature indicator (1) goes off.
2. After use, place the cordless hot glue gun down carefully
and allow it to cool down fully before you store the
appliance. The hot nozzle (10) can cause damage and / or
burns.
Charging:
1. The device comes with a USB data cable and
adapter, you can use this cable and adapter to
charge this glue gun or only use USB cable to
charge the glue gun.
2. Plug the USB cable onto the charge adapter one
end and the other end connec tto the charging port
(7) on the tool, and then pulg the charg adapter to
the 230VAC 50Hz socket. It will need around 3
hours to finish the charging task.
Or only plug in the USB into the charging port (7),
and the other end plug into the USB port on the
devices which can output 5VDC port.
3. The charging time will depen on the charging current
which device can offer. You can estimated the time
by the formular below:
Automatic switch off:
The cordless hot glue gun switches itself off after 10
minutes to save energy.
Working Advice:
♦Pull the trigger to control the flow of glue in accordance
with your requirements.
♦Apply the glue in spots. For flexible materials, such as
textiles, apply the glue in zigzag lines.
♦Press the two workpieces to be bonded together
immediately after applying the glue and hold for about 30
seconds. The glued bond is ready after about 5 minutes.
♦ During breaks in work, put the glue gun down on the
plastic stand or replace.
♦ Remove any glue residue after it has cooled down with
a sharp knife. Bonded joints can be released by heating.
MAINTENANCE
■
The glue gun is maintenance free.
■
Keep the appliance clean and dry at all times.
■
Never permit liquids to enter inside the appliance. Use a cloth to clean the housing. Never use petrol, solvents or cleansers
