User manual
Hoof trimmingcrush:SA0049
Version: 22-12-15
Page 26 of 31
1
2
3
6.2. Clean the machine.
EXPLANATION
A high-pressure cleaner may be used for cleaning.
Avoid bearings, winches and motors when cleaning with a high-pressure
cleaner. Spraying in these areas may result in a sharp reduction in service life.
Avoid all electrical components when cleaning with a high-pressure cleaner.
Spraying in these areas may result in risk of electric shocks and /or a sharp
reduction in service life.
6.3. Lubrication of rear gate
EXPLANATION
The rear gate is slid out with the aid of gas springs fitted to the gate.
To prevent grease entering the gas springs and causing damage, the gate
must only be lubricated when it is fully drawn back.
Figure 5: lubrication of rear gate
No.
What to do
Action
Result
1. Retract the rear gate.
Attach the rear leg winch to the rear
gate and tighten until the gate is fully
retracted.
2. Grease the nipples.
Lubricate the rear gate nipples using
a grease gun.
