-- 46 --
Tops - Series
5. PAN/TILT CONTROL MODE
5.1 PAN/TILT Control
The screen converts to the pan/tilt screen when pressing the
pan/tilt button on the surveillance screen.
With the pan/tilt camera installed, based on the camera & control box type, one can use
the up, down, left, right, zoom, focus and preset function.
1) Preset – Control the high-speed dome cameras preset function.
2) Camera – Power on/off the camera.
3) Light – Power on/off the lighting.
4) Wiper – Turn on/off the wiper located on the camera exterior.
5) Auto Run
–
Automatic tour of duty.
6) Mouse Control
–
PTZ speed and Mouse Control for PTZ
7) Focus – Controls cameras focus.
8) Zoom – Increase/reduce cameras image.
9) Control Key – Moves the camera up, down, left and right.
10) PTZ Protocol Name
Ú
The number in the center of the control panel shows the camera number being controlled.
The pan/tilt control function can be limited according to the type of RX receiver and
camera. When in notice of fault in movement, please check the camera and RX receiver
type.
NOTE
1)
2)
3)
4)
5)
7)
8)
10)
9)
6)
Summary of Contents for TOPS-1016
