-- 35 --
Tops - Series
When using a PAL type camera, the recording speed is reduced by approx. 17%
compared to an NTSC type. For example, an NTSC type can record 15 frames per
channel while the PAL type can only record 12 frames per channel.
Duplex mode is automatically started when search mode or configuration mode is entered.
When using 16 cameras, the maximum recording speed is 90fps is duplex mode. When
search or configuration mode is exited, the unit returns to normal recording mode.
For 3009, Frame rate will be reduced to 40% when Camera image size is set to
640 x 480 mode using Audio channel.
NOTE
3) RECORD MODE - Sets recording speed specific to recording mode. (per second)
3-1) Normal : Configures the capture rate for continuous recording.
3-2) Motion : Configures the capture rate for motion triggered recording.
3-3) Sensor : Configures the capture rate for sensor triggered recording.
3-4) Audio : Configures the capture rate for audio triggered recording.
4) LAYOUT SWITCH INTERVAL
–
Sets layout switch time in surveillance mode.
5) ALL CAMERA – Press this button to control the recording speed for all channels.
6) All channel recording speed setup – Slider to control recording rate for all channels.
7) Recording speed setup – Sets the recording speed for each channel.
8) ALL CAMERA (Pre-Alarm)
–
All cameras when Motion/Sensor/Audio is detected, images
are recorded for the programmed duration (five seconds maximum per camera) before an
event happens.
9) All cameras set bar (Pre-Alarm)
–
Setup All cameras, for Pre-Alarm function the duration
(five seconds maximum per cameras) before an event happens.
10) Camera set bar (Pre-Alarm)
–
Setup camera, for Pre-Alarm function the duration (five
seconds maximum per camera) before an event happens.
11) IMAGE QUALITY - Sets the quality of the recorded image. Image quality affects storage
capacity and transmission rate. More bandwidth and storage capacity is required for high
quality images.
12) COMPRESSION MODE
–
Select image compression method.
12-1) NORMAL - Compresses image into normal MJPEG mode.
12-2) ENHANCED - Compresses image into enhanced MJPEG mode.
13) EXIT
–
Saves setup and returns to surveillance mode.
4. CONFIGURATION MODE
Summary of Contents for TOPS-1016
