Woodward HighPROtec MCDLV4, Manual

Page: 479 / 1275

Module: Protection (Prot)
Module: Protection (Prot)
Prot
The module »Protection« serves as outer frame for all other protection modules, i.e. they are all enclosed by the
module »Protection«.
If in module
»Protection« the parameter »Function« is set on »inactive« or in
case the module is blocked, then the complete protective function of the device
does not work anymore.
Protection inactive
If the master module
»Protection« was permanently deactivated or if a temporary blockage of this module has
occurred and the allocated blocking signal is still active, then the complete functionality (protection) of the device is
zero. In such a case the protective function is »inactive«.
Protection active
If the master module
»Protection« was activated and a blockade for this module was not activated respectively the
assigned blocking signal is inactive at that moment, then the
»Protection« is »active«.
Blocking all Protective Elements enduringly
In order to allow (the principle use) of blocking the entire protection call up the menu [Protection/Para/Global Prot
Para/Prot]:
Set the parameter »
Function = inactive«.
Blocking all Protective Elements temporarily
In order to allow (the principle use) of blocking the entire protection call up the menu [Protection/Para/Global Prot
Para/Prot]:
Set the parameter »
ExBlo Fc = active«;
Choose an assignment for » ExBlo1«; and
Optionally choose an assignment for » ExBlo2«.
If one of the signals becomes true, then the entire protection will be blocked as long as one of these signals are
true.
479 MCDLV4 DOK-HB-MCDLV4-2E