Manual 37137B
ESDR 4 - Current Differential Protection Relay
Chapter 6.
Configuration
Introduction
≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡
When in configuration mode (simultaneous pressing of "Digit
↑
" and "Cursor
→
"), the configuration screen can
be advanced by pressing the "Select" button. Should there be no entry, parameter change or other action for 60
seconds, the unit will automatically revert into Automatic mode.
During the configuration mode, the monitoring function is still active. This means inevitably, that while adjusting
parameters during operation, it is possible to cause a tripping of the relay.
© Woodward
Page 21/35
