4
Configuration
CAUTION!
Only change controller parameters in standby mode! Otherwise, abnormal conditions
including shutdown may occur.
Configuration can be performed via
• HMI using front panel buttons
•
• USB connected PC/laptop using ToolKit-SC configuration software (full edit)
•
The configuration software ToolKit-SC is part of the delivery and (latest edition) can be
downloaded from our website Woodward.com. Search for "ToolKit-SC".
Different digital/relay outputs can be configured with the same output type .
E.g.: Contents Setting of Flexible Output Port 1 is Output Type #18 "Horn". So #18 "Horn"
can still be used for other Output ports, too.
Input the sensor curve: X values (resistor) must be arranged increasing from small to
large, otherwise, an error occurs.
If selectedsensor type is “None”, the sensor curve is not working.
If a sensor has an alarm switch only, the release condition of this sensor must be
configured as “Never”, otherwise, a warning displays or a shutdown can occur.
4.1
Access to the Control
4.1.1
Front Panel: Operating and Display Elements
29
easYgen-400
B37884A
4 Configuration
Released
