Woodward easYgen-3000XT Series, Manual, Page: 382 / 1205

ID Parameter CL Setting range
[Default]
Description
settings see ╚═▷ “9.3.1
LogicsManager Overview” .
4.4.5.2 Operation Mode AUTO - Automatic Run
General notes
The start of the engine can be performed via the following different logical conditions.
• A discrete input •
• A temperature level •
• An interface start condition •
• A start request from the LDSS function •
• A timer •
• Any logical combination •
If this logical output becomes TRUE in AUTOMATIC operating mode, the generator starts
and the GCB will be closed. The simultaneous activation of other LogicsManager outputs
(e.g. Stop req. in Auto) may affect this function.
The breaker handling depends on the configured application mode and breaker logic.
Refer to ╚═▷ Fig. 176 and ╚═▷ “9.3.4 Logical Outputs” for the priority of the logical
outputs in case that more than one logical output is TRUE.
382 easYgen-3000XT Series B37574
4 Configuration
4.4.5.2 Operation Mode AUTO - Automatic Run
Released