Symbol/Softkey
Description
+
Indicates when a condition was activated
-
Indicates when a condition was de-activated
4.1.5.4
Sequencing
Fig. 97:
Sequencing screen
The sequencing screen shows all gensets participating in load sharing. The operation
mode of each genset as well as the state of its GCB is shown on this screen.
Symbol
Description
AUTOMATIC Mode is active
MANUAL Mode is active
STOP Mode is active
TEST Mode is active
GCB of respective genset in sequence is closed.
GCB of respective genset in sequence is open.
Own easYgen device number
Sequence is running with respect to the settings e.g., the sequencing timing - see table below:
Generator is becoming "Add-on" to the (multiple) genset system.
Generator is going "Add-off" from the (multiple) genset system.
The remaining time is displayed on the upper right side on the grey bar "Sequencing ...",
see table below:
"..." text on the grey bar
Description
Parameter / ID
Sequencing Add-on delay ... s
Shows the remaining time until the own
generator is add-on
Add-on delay:
138
easYgen-3000XT Series
B37574
4 Configuration
4.1.5.4 Sequencing
Released