Values and units must fit
Device and software offer a very flexible handling of values with well defined selectable
rules. It is on customers responsibility to combine what fits.
From device side it is neither restricted nor controlled to use values in a wrong way.
Configuration and Rebooting
Wait before rebooting
Changing configuration/parameters becomes effective immediately. To be sure that
the changes have been saved internally, wait about 20 seconds before
rebooting or disconnecting the power.
Menu structure (menu tree)
The menu structure of HMI/display and ToolKit is aligned.
Exceptions
• The well introduced HMI/display softbutton »Next Page« is continued but in ToolKit
•
named »STATUS MENU«.
(In ToolKit »Next Page« is used to go to the next page.)
• Some monitoring parameters in HMI/display are in ToolKit placed directly with it's
•
settings e.g.: find 10341 »Freq. dep. derating of power« at
[Next Page / Setpoints / Derating] in HMI/display but
[PARAMETER / Configuration / Configure application / Configure controller / Configure
load control / General load control] in ToolKit
• »Sequencing« in HMI/display comes with a separate softbutton - ToolKit offers the
•
information together with others as part of the »States easYgen/
Sequencing« screen.
The following drawing shows the first three (major) levels of the easYgen-3100XT-
P1/3200XT-P1 menu structure:
121
easYgen-3000XT Series
B37574
4 Configuration
Released