-20-
W1808/W1809/W1810 Cyclone Dust Collectors
SE
T
U
P
4.
Place a large piece of cardboard on the ground to
prevent scrapes from bare concrete for the next
steps.
5.
Lay the stand assembly on its side and slide the col-
lector assembly into the stand assembly.
6.
Fasten the collector assembly to the stand with (8)
3
/
8
"-16 x 1" hex bolts, (16)
3
/
8
" flat washers, and (8)
3
/
8
"-16 lock nuts, as shown in
Figure 16
.
7.
Model W1808–W1809: Slide the lower legs onto the
upper stand assembly, and fit the lower braces into
the leg notches. Fasten the upper and lower legs
and lower braces using (24)
3
/
8
"-16 x
3
/
4
" hex bolts,
(16)
3
/
8
"-16 x 1" hex bolts, (80)
3
/
8
" flat washers,
and (40)
3
/
8
"-16 lock nuts. Refer to the W1808 and
W1809
Parts Breakdowns
on
Pages 48
and
51
for
more detail.
Note:
On Model W1810, the lower legs will be
installed in
Step 19
, on
Page 23
.
Note:
It will be easier to assemble the lower legs
and braces onto the upper stand assembly if you
keep the fasteners loose.
8.
Place the 3 x 6 x 1800mm roll of foam tape on the
intake cylinder, as shown in
Figure 18
.
Figure 18.
Foam tape adhered to intake
cylinder.
Figure 17.
Collector assembly fastened to
the stand, Model W1808-09.
Lower Brace
Lower Leg
Figure 16.
Collector assembly fastened to
the stand, Model W1810.
Summary of Contents for SHOP FOX W1808
